EXTEGRA IP dynamic 9000 FX
specification
- High-performance camera with 1080p25/30 HD resolution and HDR in an explosion-proof housing of either anodized aluminum or ruggedized, electropolished 316L stainless steel.
- All models hold international certifications for use in hazardous environments.
- Easy one-piece installation with a motorized zoom lens and autofocus mechanism.
- Optional integrated Ethernet provides versatility for longer cable runs or where electromagnetic interference is a concern.
- ONVIF conformant; provides interoperability with other conformant systems.
Functions
High dynamic range models
Dynamic models have a full 1080p25/30 HD imaging platform with multiple exposures capable of delivering high dynamic range (HDR) video in scenes with simultaneous bright and dark areas. When operated in HDR mode, the camera makes multiple, simultaneous exposures of the same scene to capture details in both bright and dark parts of the scene.Sodium vapor lamp white balance
The camera is an exceptional performer when capturing video under a sodium vapor lamp (a street lamp or tunnel lamp, for example). Images under these conditions may have a yellowish tint, which can make identification difficult. In the Sodium Vapor White Balance mode, the camera automatically compensates for the light from a sodium vapor lamp to restore objects to their original color.Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly. The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.Dual power options
The camera can be powered by a network compliant to High Power-over-Ethernet (Bosch’s version of High PoE) using a Bosch model of High PoE Midspans (sold separately). With this configuration, only a single (Cat5e/Cat6e) cable connection is required to view, to power, and to control the camera. The camera can also accept a standard 24 VAC power source if a High PoE network interface will not be used. User-supplied wiring must be in compliance with electrical codes (Class 2 power levels). For maximum reliability, the camera can be connected simultaneously to a High PoE Midspan and a separate 24 VAC power source. If High PoE and 24 VAC are applied simultaneously, the camera usually selects auxiliary input (24 VAC) and will draw minimal power from the High PoE Midspan. If the 24 VAC power source fails, the camera switches power input seamlessly to High PoE. After the 24 VAC power source is restored, the camera switches power input again to 24 VAC. Refer to the table in the Installation/configuration notes section for more information.| Brand Model | EXTEGRA IP dynamic 9000 FX | ||||
|---|---|---|---|---|---|
| Imager | 1/2.8-type Exmor CMOS sensor | ||||
| Effective Picture Elements (Pixels) | 1944 x 1224 (2.38 MP) | ||||
| Lens | 30x Zoom 4.3 mm to 129 mm F1.6 to F4.7 | ||||
| Field of View (FOV) | 2.3° to 65° | ||||
| Focus | Automatic with manual override | ||||
| Iris | Automatic with manual override | ||||
| Electrical | |||||
| Input Voltage | 24 VAC ± 10%, 50/60 Hz or Single Ethernet High PoE cable connection | ||||
| Power Consumption | 18W / 28VA (no heaters) 68W / 85VA (with 24VAC and heaters ON) 48W / 50VA (with High PoE and heaters ON) | ||||
| Communications / Software Control | |||||
| Camera Setup/Control | Via Internet Explorer web browser version 7.0 or later, Bosch Configuration Manager, Bosch Video Management System (BVMS), Bosch Video Client (BVC), or support for third party software | ||||
| Software Update | Network firmware upload | ||||
| Network | |||||
| Standards / Video compression | H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG | ||||
| Streaming | Four (4) individually configurable streams in H.264 and M-JPEG, configurable frame rate and bandwidth: | ||||
| Two independently configurable H.264 streams | Stream 1: H.264 Main Profile (MP): • 91xx models: 720p50/60 • 92xx models: 1080p25/30 Stream 2: H.264 Baseline Profile plus (BP+) or H.264 MP Standard Definition (SD) or Copy of Stream 1 | ||||
| Two additional streams | M-JPEG stream and High Definition (HD) I-frame only stream | ||||
| Resolution (H x V) | |||||
| • 1080p HD | 1920 X 1080 | ||||
| • 720p HD | 1280 x 720 | ||||
| 432p SD | 768 x 432 | ||||
| 288p SD | 512 x 288 | ||||
| 144p SD | 256 x 144 | ||||
| Network | |||||
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication | ||||
| Encryption | TLS 1.0, SSL, DES, 3DES | ||||
| Ethernet | 10/100 Base-T, auto-sensing, half/full duplex | ||||
| Connectivity | ONVIF Profile S , Auto-MDIX | ||||
| Ethernet Connector | RJ45 | ||||
| GOP Structure | IP, IBP, IBBP | ||||
| Data Rate | 9.6 kbps to 6 Mbps | ||||
| Overall IP Delay | 240 ms | ||||
| Audio | |||||
| Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate | ||||
| Signal-to-Noise Ratio | >50 dB | ||||
| Audio Streaming | Bidirectional (full-duplex) | ||||
| Local storage | |||||
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) | ||||
| Recording | Continuous recording, ring recording. alarm/ events/schedule recording | ||||
| Preset Zoom Positions | 256 | ||||
| Camera Setup / Control | 100 Base Tx Ethernet | ||||
| Supported Languages | English, Czech, Dutch, French, German, Italian, Polish, Portuguese, Russian, Spanish | ||||
